Manizek BH508 tripod dynamic balance hydraulic damping pan head for photography and videography

Product details

• Dynamic balance hydraulic gimbal
  The handle supports left and right swapping Dynamic balance gear adjustment | Level bead lighting Quick release plate balance adjustment
• 

• This hydraulic photography gimbal features a multi gear load-bearing selection continuous rebound balance system, allowing for precise control and experience.
• 

• The handle supports left and right switching
  The sawtooth bite design is adopted to meet the shooting habits of left and right hands.
• 

• About Dynamic Balance
  Because everyone uses different equipment, the weight is different. First, adjust the static balance adjustment by sliding the gimbal tray so that the force of the device falling forward and backward is consistent. Hold the device with your hand and adjust the dynamic balance gear knob until the device will not continue to fall forward when your hand leaves it. If the device bounces back to the center, it should be adjusted counterclockwise. When adjusted correctly, the device should be able to stop within the entire pitch range without external force assistance, locking knobs, and increasing damping, achieving perfect dynamic balance. (The higher the dynamic balance gear, the greater the rebound load-bearing capacity and the greater the weight of the equipment it bears)
• 

• Pitch adjustment range -90°/55°
• 

• Level bead setting light function
  The left side can control the horizontal bead light, which is convenient for quickly finding the horizontal position adjustment when shooting at night
• 

• Movable quick-release plate position balances front and rear ratio
  The quick-release plate can achieve a horizontal movement distance of 35mm in the front and 35mm in the back
• 

• Slide-in quickinstall structure
  When the quick release plate slides to the corresponding position, there will be obvious tactile and audible sensations, automatically triggering the safety lock

  Manfrotto specification quick release plate-Comes with 1/4 and 3/8 mounting screws

  Quick release plate size: 50*120*10mm(1.96*4.72*0.39”)
• 

• Bottom mounting screw hole 3/8 installation specification
  Three reinforcement screws, bottom round diameter 75mm/2.95”
•