01020304
Professional buckle tripod large load bearing
About dynamic balance
Everyone uses different equipment, so the weight is different. First, adjust the static balance adjustment by sliding the gimbal support plate to adjust the forward and backward strength of the device. Hold the device with your hand and adjust the dynamic balance gear knob until your hand leaves the device and it will no longer fall forward. If the device bounces back to the center, adjust it counterclockwise. When adjusted correctly, the device should be able to stop throughout the entire pitch range without external assistance, locking knobs, or damping, achieving perfect dynamic balance. (The higher the dynamic balance gear, the greater the rebound load, and the greater the weight of the load-bearing equipment)
Product details
-
Fluid head bottom integrated ball bowl designThe bottom of the head comes with a ball bowl 75mm , can be directly installed tripod use
-
About dynamic balanceEveryone uses different equipment, so the weight is different. First, adjust the static balance adjustment by sliding the gimbal support plate to adjust the forward and backward strength of the device. Hold the device with your hand and adjust the dynamic balance gear knob until your hand leaves the device and it will no longer fall forward. If the device bounces back to the center, adjust it counterclockwise. When adjusted correctly, the device should be able to stop throughout the entire pitch range without external assistance, locking knobs, or damping, achieving perfect dynamic balance. (The higher the dynamic balance gear, the greater the rebound load, and the greater the weight of the load-bearing equipment)
-
Semi-automatic rebound StructureThe new locking design ismore stable(The silver Angle adjusting ring can adjust the Angle of 3 gears, and the spring structure is equipped with automatic rebound. When the maximum Angle of the foot tube is expanded, the Angle adjustment ring is pulled up to adjust, and the Angle is adjusted down without pulling the adjustment ring.Lock the Angle knob at the bottom, and twist the knob upward to connect with the Angle adjusting ring to fix the Angle, and play the Angle locking state of the foot tube, greatly strengthening the stability and safety)
-
Buckle lock systemThe aluminum alloy buckle only needs to break about 1/2 position to complete the unlocking and save effort.
-
Screw holes are 3/8"scre hole on the bottom , to replace different foot padDifferent pads/nails can be changed according to different shooting environments.
product featured
1.Ball bowl and base integrated design hollow design.Installation requires no additional ball bowl seat, 75mm ball bowl .
2.Fluid head bottom integrated ball bowl design.The bottom of the head comes with a ball bowl 75mm , can be directly installed tripod use.
3.Quick horizontal ball bowl micro Angle.The integrated design has fixed knobs under the ball bowl, which can fix the ball bowl vertically or tilt the angle of different directions to quickly help the horizontal position. (the head is assisted by a level)
4.Low position mode to achieve 23cm/9.05” low Angle shooting.