Shaped center tripod

The portable tripod adopts the combination of irmegular center shaft and wedge foottube, which makes the storage volume smaller, more compact and more comfortable tohold. With a two-stage design for the shaft, the lower half can be disassembled tobecome a without centre shaft tripod, which can capture the composition at the lowestAngle.

Product size 530*80*80mm/20.86*3.14*3.14”
Special Center shaft
Maximum workingheight 1580mm/62.20”
Minimum working height 180mm/7.08”
Folding length 530mm/20.86”
Material Aluminum alloy
Maximum load 5kg/11.02lb
Weight 1.51kg/3.32lb
Tube diameter 31/27/23/19mm 1.22/1.06/0.90/0.74”

product details

product description

1.Special shape central shaft design, storage volume reduced by about19%.The use of the opposite sex foot tube, without losing stability while breaking the gap of traditional tripod storage, storage is more compact.

2.The wedge-shaped foot tube is combined with the shaped central shaft to make full use of space, and the storage is compact and unified without prominence, and the feel is comfortable.

3.Semi-automatic rebound adjustment module design.Spring semi-automatic design, independent three-speed adjustment, can be adjusted according to the needs of the environment.

4.Buckle foot lock system.Purchased buckle locking mode, can quickly shrink the foot tube, aluminum alloy buckle only need to open about 1/2 position, complete the unlock.

5.Rubber foot pad.The rubber foot pad at the bottom of the foot tube has three different angles to ensure the best stress point with the contact surface.

6.Inverted Ball Head.The main body of the gimbal has a hollow design, and the ergonomic design of the trigger better fits the mobile phone and saves effort to unlock. It adopts a 30mm sphere, which is small in size and large in load-bearing capacity.

7.Adjust damping smoothly and feel comfortable in hand.When adjusting the camera angle, the sphere rotates smoothly and delicately. 90° opening design allows for quick switching between horizontal and vertical shooting.

Product details

“No center column mode”

The center column is detachable and can be converted to low-angle shooting.

The center shaft can be inverted to achieve low Angle macro shooting

Handle complex shooting scenes

Operation steps：1. first open the hook at the bottom of the rotating shaft, and then loosen the locking knob to pull out the shaft.2.The bottom of the tripod flip out the locking knob of the central shaft, rotate the bottom hook to stagger.

Semi-automatic rebound adjustment module design

Spring semi-automatic design, independent three-speed adjustment, can be adjusted according to the needs of the environment.